2CH H.265 CRD04 with full 1080 in real time, Front Rear view Commercial Vehicle Dash Camera with 4G,L ock GPS,G-Sensor and Wifi Function BR-CRD04 , our latest Commercial Vehicle Dash Camera with lock ,built in high quality GPS , high sensitive MIC ,wifi wireless connection ,app support ios/android system ,support F/1080P/H150°, C/720P/H150° video ,Unique Compact Design...
2CH H.265 CRD04 with full 1080P in real time Smart Commercial Vehicle Dash Camera
BR-CRD04 , our latest Samart Commercial Vehicle Dash Camera with lock ,built in high quality 4G, GPS , G-Sensor ,wifi wireless connection ,app support ios/android system ,support F/1080P/H150°, C/720P/H150° video ,Unique Compact Design... will be wrote to the 256G TF card and CE,E-MARK approved
BR-CRD04 compatible with car charger and car power ,9-32V,2MPI CMOS sensor image ,wide angle lens ,F/1080P/H150°, C/720P/H150° .support 256G TF memory card , 2-CH Av output , camera with a lock to make it safer
Size / weight / color
L143mm*H46mm*ø38mm / 120g / black
2MPl CMOS image
6G (D: 175°Hl: 150°, V: 90°)
Support F/1080P/H150°, C/720P/H150°
Built-in WIFI module(IEEE 802.11b/g/n)
Parking guard recording (parking guard function is on, the vehicle vibration after flameout)
Audio and video format
Video: H.264/H.265，MP4 format；Audio: AAC
TF high-speed memory card (maximum support 256G, make sure to use CLASS10 and above original genuine card)
Upgrade button (press the key to enter the upgrade mode)
Built-in triaxial three-dimensional collision acceleration sensor
Time synchronized automatically when connect to the internet or GPS.
The recorder uses car power and turns on the parking guard after the ignition started, if the vibration automatically starts the video
English, Simplified Chinese, Traditional Chinese, etc.
Support JPG format photo capture
Resolution / Bit rate / Frame rate
Time 1, 2, 3 minutes optional
SD card upgrade(press the upgrade button to enter the upgrade mode)
Reserved UART / IR interface
Reserved HDMI interface
Define input / output alarm line (active low)
With lock to protect card, tamper resistant
12V-30V car battery
Static power consumption
Less than 10mA
Good performance temperature
-25 ° C to 65 ° C
-40 ° C to + 75 ° C
-40 ° C to + 90 ° C
Power button：Keep pressing the button to turn on.
Reset button：By pressing reset button to restart.
Upgrade button: By pressing this button to enter into upgrading mode
1.The dash camera needs to synchronize the time firstly . It can be synchronized automatically when connecting to the App or the GPS.
2Please format the new TF memory card before using it. (FAT32 format)
3.Please backup the data before any of your formatting operation.
4.TF card must be class 10 or above, otherwise, it will probably cause the recording or operating abnormally, even the system halted.
5.Due to the erasure limited, please do not format the TF card frequently. Replacing after long using.
6.Live preview will have a little bit delay on account of the WIFI transmission.
7.Do not return the card when recording.Otherwise, it will cause the damage or the lose of the last video, even the TF card damage.
8.Keep the dash camera clean, it benefits to the better recording.
9.All the files in the TF card erase and recover in circle, please backup the important files to other storage media in time.
10. When the dash camera is in the process of turning off , It will not be on even it is in the car ACC ignition .Only when it is completely shut down then the ignition can make the dash camera turn on .
11.Ensure that the GPS signal is good enough to use the GPS function.If the position is isolated by metal film, it will affect the GPS positioning.
12.Ensure to connect the APP in the wifi effective range. It can be used normally around 10m
13.Check whether there is bluetooth signal surroundings that interferes the wifi signal,when it is not stable
14.Resetting will probably cause the damage or lose of the files.
15.Do not disassemble, the rotation shaft can still rotate.
Previous: No Information